Skip page content

Autodesk Inventor – Changing material properties across multiple parts

generic viagra generic viagra viagra viagra cheap levitra online vardenafil cheap levitra online vardenafil cialis online cialis online levitra online levitra online levitra online levitra online viagra viagra generic cialis generic cialis levitra online levitra online india cialis india cialis viagra viagra cialis online cialis online

Here at Tata Technologies we often get asked a lot of great questions and I try to share those as much as possible.  This post is no different, we have been recently asked “What is the best way to change material properties in multiple parts without Vault or going through the task of opening each file?”  It’s is very easy just watch the video.

Video Link: Autodesk Inventor – Changing material properties across multiple parts

Set the cruise control “Part 1”

Autolimits, a tool I wish I would of had available to me when I was designing the last fourteen years. This allows the designer to concentrate strictly to designing. I would have used all three types of the autolimits. On the dimensional side I would of added autolimits to all my cylinder files to set-up for stroke distances and would have always made sure I always had stroke to go for an example. Area-Perimeter I would have used for when I was designing inside a swing radius for a machine. The last one physical property I would have used on at least 85% of the jobs I have done over the years. I seemed to be always working on a design that had some type of weight restriction and having autolimits would have definitely saved time in the design phase and probably took the word rework off of the shop floor because of weight issues.

AutoLimits are categorized as monitoring three different types of input
1. Dimensional
2. Area-Perimeter
3. Physical Property

AutoLimits are designed to be used sparingly, monitoring only critical design information of interest to you. In an assembly, only AutoLimits in the edited document are enabled and displayed. AutoLimits existing at other levels (subassembly or components) are neither visible nor accessible until that level or component is edited.

AutoLimit boundaries use both color (green, amber, red) and shape (circle, triangle, square) to provide feedback related to boundary conditions. The colors equate to conditions:
• Green: within boundary limit
• Amber: near boundary limit
• Red: exceeds boundary limit

The following short video shows working with setting the Physical Property Limit dealing with mass. Watch how my display changes when I have exceeded my limit.

Check out my video of how to do this.

http://screencast.com/t/wuuXk254

Submitted by Dave of the INCAT CAD Geeks

CAD Geek Speak! Autodesk CAD Geek Speak! Dassault Systêmes</i> CAD Geek Speak! Siemens